Use the < TUNE or TUNE > buttons on the remote or [ ] or [ ] buttons on the micro system to select the preset number from 1-
10 you wish to use. Then press the ENTER button on the remote or UNPAIR/ENTER on the micro system to store.
When stored the display will show PRESET X STORED.
Once a station is saved toa preset you will no longer see # EMPTY when pressing and holding the MEMORY button, instead
the station name or frequency will appear.
Recalling station presets
To recall a stored preset station press the relevant numeric button on the remote control.
For example to recall the station stored on preset 3 press the numeric button 3. And to recall a station stored on location 10,
press the 10+ button and then the O button.
Alternatively use the v PRESET / A PRESET buttons on the remote to cycle through the preset list
Switch the input mode to CD & follow the instructions below to load a CD/ MP3CD.
1.
Press the OPEN/CLOSE button (10) on the micro system or remote, when the disc compartment cover slides fully to
the left; insert a disconto the spindle (label facing outwards) (Fig 8)
2.
Press the OPEN/CLOSE button (10) once more to close the drawer.
3.
When the door is closed READING will appear on the display as the unit detects compatible audio tracks .
Playing a CD/ MP3CD
1.
After loading a CD in the steps above, the disc will be read and playback will begin automatically from track 01
2.
To stop playback press the■ STOP button on the micro system or on the rem ote.
3.
To pause playback press the ►Il PLAY/PAUSE button micro system or on the remote during playback. To resume
playback press the ►Il PLAY/PAUSE button once more.
Skipping tracks on a CD/ MP3CD
1.
Skip to the next track on a disc by pressing [ ] button on the micro system or the remote control.
2.
Skip to the previous track by pressing [ ] button on the micro system (6) or the remote control.
Fast searching tracks CD/ MP3CD
1.
To fast forward a track during playback press and hold on the micro system or remote control.
2.
To fast rewind a track during playback press and hold on the micro system or remote control.
Programmed playback CD
1.
Press the STOP button to stop playback (if required ).
2.
Press the MEMORY button on the remote control. You will see the below options appear on the display.
3.
Use the[ ] or [ ] buttons to select the track
4.
Press the MEMORY button to proceed to programming the next track.
5.
Repeat steps 3-4 until you have programmed all the tracks you require in the playlist, up toa maximum of 20 tracks.
6.
Press the ►Il PLAY/PAUSE button on the micro system or remote to begin playback in the programmed order.
7.
To cancel the program sequence press the ■ STOP button on the micro system or remote twice.
Follow the below instructions to repeat tracks on a CD.
1.
During playback press the REPEAT button on the remote control to repeat the current track.
2.
Press the REPEA T button again to repeat all tracks on the disc. (Fig 11)
11