Maintenance - Recommendations; After-Sales Service - Supra CHLOE Installations- Und Bedienungshandbuch

4. MAINTENANCE - RECOMMENDATIONS

ASH REMOVAL
Regularly empty the removable ash tray, once the appliance is
cold. The build-up of ashes hinders the air flow under the grid,
distorting the flow and affecting combustion.
Then replace the ash tray.
STOVE MAINTENANCE
Do not use water, solvents or abrasive products (not even slightly)
to clean the stove, only a soft, dry cloth.
CLEANING THE GLASS WINDOW
Clean the glass when it is cold, with a damp cloth dipped in wood
ashes. The air sweep system keeps the glass as clean as
possible. However, during normal operation, there may be a slight
darkening in some areas of the glass. In slumber mode, the air
sweep is less efficient.
SOOT REMOVAL
The legislation provides for 2 chimney sweeps a year (including
one during the heating period) to be performed with mechanical
means (rotary brush). Keep the documents signed by the company
responsible for this work as proof that this has been done. Vacuum
the soot from the stove body. Remove the baffle plate and panels.
Remount the baffle plate, in the right direction. Then replace the
baffle.
Before re-using the appliance, check that the parts are mounted
correctly.
ANNUAL MAINTENANCE
After each heating season, clean the stove thoroughly and check
that all moving parts of the appliance are operating correctly.
Check the conditions of the seals and the parts in contact with the
flames.

5. AFTER-SALES SERVICE

The appliance has parts that are subject to wear and tear and
should be checked during the annual maintenance. Your stockist
will supply you with the necessary spares.
When requesting information or spares, you need to indicate the
part number and the serial number of the appliance, which can be
found on the nameplate. Only use the spares supplied by the
manufacturer.
6'
4
5
6
4
5
10
9
11
13
12
6
3
1
3
2
1
8
7