Settings Of Sensitivity, Tone Range & Hold Time; Discard/Change Settings - CSS MicroSystems AssistX AS one Gebrauchsanweisung

Settings of Sensitivity, tone range & hold time:
The settings of the AS one can be displayed and set by using the
buttons. When setting the sensitivity, tone range and holding time,
the LED indicates the selected setting range with a color code.
1

Discard/change settings:

To see the current setting of sensitivity, tone range or hold time, press
the corresponding button.
• starting changes
By repeated pressing of the corresponding button, you can
move through the whole adjustment range. The
the actual setting. 1 sec after the button is released, the
starts blinking for 2 sec.
• enter changes
Press the button while the
setting. AS one confirms with a longer sound. The new value
has been accepted.
Instructions for Use AssistX AS one | 39
LED is blinking to save the new
1
LED shows
1
LED
1