Atag One zone Schnellstartanleitung Seite 9

Wi-Fi connection and product registration
1
Select 'YES' on the 'NETWORK CONFIGURATION' screen
(Fig. 3). If 'NO' is selected, complete steps 2 and 3.
2
Open the 'CONNECTIVITY' menu in the ATAG One Zone and
select 'NETWORK CONFIGURATION' (Fig. 4).
3
Then log into the app to start the configuration.
!
NOTE! If 'NETWORK CONFIGURATION' is not shown in the
'CONNECTIVITY' menu, select 'ON/OFF WIFI NETWORK'
and set it to 'ON'. Now 'NETWORK CONFIGURATION' will
be shown.
After logging into the app with your previously created account, your
phone will automatically start searching for your thermostat (Fig. 5).
!
NOTE! The thermostat only works with 2.4 GHz Wi-Fi
networks. 5 GHz networks are not supported.
• If both are present, make sure you choose the 2.4 GHz
network.
• If your smartphone loses its connection with the
product, check your phone's Wi-Fi settings to make sure
automatic network switching is turned off.
9
NETWORK CONFIGURATION
Would you like to connect your
product to the internet?
YES NO
Push to confirm
Fig. 3
CONNECTIVITY
ON/OFF WIFI NETWORK >
>
NETWORK CONFIGURATION
CONNECTIVITY INFO >
RECONFIGURE >
Wi-Fi SIGNAL >
Push to confirm
Fig. 4
Fig. 5