Setup Menus - Panasonic AJ-YAD850G Bedienungsanleitung

Setup menus

The following setup menu items can be used when the AJ-YAD850G has been installed
in the AJ-SPD850.
Item
Super-
No.
imposed No.
display
220 AV/C 0000
CMD 0001
SEL
880 DIF 0000
SPEED 0001
0002
881 DIF 0000
*1 TYPE 0001
0002
882 DIF 0000
IN |
CH 0063
0064
883 DIF 0000
OUT |
CH 0063
0064
886 DIF 0000
CONFIG 0001
|
0255
889 DIF 0000
AUD 0001
IN
890 DIF 0000
AUD 0001
OUT
*1 When the 625i system has been selected from the AJ-SPD850 User Menu No. 070 "TV SYSTEM" this
item is not displayed.
The underlining indicates the factory setting.
9(E)
Setting
Super-
imposed
display
OFF For the selection of an AV/C command of the IEEE1394 interface
ON when the REMOTE button is lit.
0: The AV/C command is not used.
1: The AV/C command is used.
S100 For setting the transfer rate of the IEEE 1394 interface playback.
S200 0: 100Mbps
S400 1: 200Mbps
2: 400Mbps
DVCPRO For setting the format used for playback.
DV 0: The format is forcibly set to DVCPRO for output.
AUTO 1: The format is forcibly set to DV for output.
2: The same format as that of the playback data is set.
<Note>
When you play back the data recorded in DVCPRO50 format, the
setting on this menu is ignored.
0 For setting the input channels.
| 0-63: These are fixed at designated values.
63 64: This is not fixed at a designated value.
AUTO When the power is turned on, the input channel is initialized to
63.
0 For setting the output channels.
| 0-63: These are fixed at designated values.
63 64: This is not fixed at a designated value.
AUTO When the power is turned on, the output channel is initialized to
63.
DFLT Expansion menu
1 Normally, the "DFLT" setting is used for this item.
|
255
CH1&2 For the selection of the channel to be recorded, when DV data with
CH3&4 4CH mode audio signals is recorded.
0: CH1 and CH2 of the DV format data received are selected.
1: CH3 and CH4 of the DV format data received are selected.
CH1&2 For the selection of the channel when the audio signals of DV data or
CH3&4 DVDPRO in 4CH mode are played and outputed in the DVCPRO or
DV format.
0: CH1 and CH2 for playback data are selected.
1: CH3 and CH4 for playback data are selected.
Description of settings