Num'axes Canicom GPS Benutzeranleitung Seite 25

Press the button
« Start »
- Position your handheld horizontally as shown in the diagram.
- Press 'start' and hold it in position for 3 seconds. The handheld vibrates to tell you that step 1 is
validated.
Press the
button « start »
- Then move on to step 2: press 'start' and move the handheld in figure 8 motions by returning it
halfway through as shown in the animation. The handheld vibrates to tell you that step 2 is
validated.
Guide Canicom GPS – Indice B
Wait for the
end of the
countdown
25/84