TFA BOXX2 Bedienungsanleitung Seite 21

TFA_No. 60.2562.01GB_Anleitung 18.08.2021
BOXX2 – Radio-controlled alarm clock with indoor climate
8.2.3 Activation of the alarm time for the days of the week
• Set the alarm type with the ALARM-MODE slide switch:
– Position 1-7: alarm times 1 + 2 activated daily
– Position 1-5: alarm times 1 + 2 activated from Monday to Friday
– Position USER: alarm time 1 + 2 activated on Saturday and Sunday (default setting) or individual setting
• Important note: In order for the alarm to ring, the alarm must be activated. Slide the ALARM switch 1 and 2 forwards.
8.2.3.1 Individual setting of the alarm time for all days of the week
• Press and hold the ALARM button in normal mode for three seconds.
• The top weekday (MONDAY) flashes.
• With the SET button you can now select which alarm time is activated on Monday.
– Alarm time 1
– Alarm time 2
– Alarm time 1 + 2
– no alarm
16:57 Uhr Seite 21
– 40 –
BOXX2 – Radio-controlled alarm clock with indoor climate
• With the ▲ or ▼ button you can now select the days of the week one after the other, and activate or deactivate the alarm
times with the SET button.
• After completing the entries, confirm the setting with the ALARM button.
8.3 When waking
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached. The corresponding alarm time 1
or 2 flashes on the display. There are two different alarm tones.
• Press briefly any button (except SNOOZE/LIGHT) or press and hold and the SNOOZE/LIGHT button and the alarm will stop.
• The alarm sound automatically turns off after 2 minutes if not stopped manually.
• When the alarm rings, press the SNOOZE/LIGHT button shortly and the snooze function is activated.
• The backlight turns on for 5 seconds. The snooze symbol flashes on the display. The alarm will be interrupted for the set
snooze interval.
9. Illumination
• Press the SNOOZE/LIGHT button. The backlight turns on for 5 seconds.
• Move the AUTO LIGHT ON/OFF switch to ON, a weak backlight turns on automatically as soon as the light sensor registers
darkness.
• To deactivate the night backlight, slide the switch AUTO LIGHT ON/OFF to the position OFF.
– 41 –