Modster FOLD 4K Betriebsanleitung Seite 31

Manual
12. Replacing Blades and Fixing Issues
Blade Replacement
Your drone blades are very strong, but sometimes they can get damaged by a bad crash. You have spare blades in the box and you are able to
replace them. It is as easy as placing a new one back over the motor bar.
You must always replace an A blade with an A blade and a B blade with a B blade.
The drone cannot be lifted or does not fly in your chosen direction
1. The most commont reasons for a drone which cannot be lifted or does not fly in your chosen direction are hair and debris wrapped
around one or more of the blades. It is simple to remove these obstacles. Take the blade off and remove the debris and place the blade
back on.
2. The batteries in the drone may need charging and the batteries in the controller may need replacing.
3. You may have knocked your trim button settings out of sync. Follow the instructions earlier in the booklet to reset them to the factory
settings and then retrim as desired.
13. Warnings
1. The Drone is designed for 14+
2. Adult supervision is always advisable with any form of flying toys
3. Always ensure your flight area is free of all obstacles before taking off and ensure the Drone is always flown in excess of 1,5 meters from yourself
4. Remove all batteries from the drone and controller when not in use
5. Never overcharge
6. Never leave the charge unattended
7. Never touch the drone motors during or after flying as they can get hot
8. Never touch the blades, when they are in motion
9. If the drone is damages, stop using it immediatley
10. Do not dispose of any parts of the drone or Controllerin the normal rubbish. All Parts should be taken to your local recycling centre
11. the battery in the drone should never be exposed to any form of high temperature or disposed of in a fire
www.modster.at
MODSTER FOLD 4K
31