Inhaltsverzeichnis
Werbung
1) Open the wall base, unscrewing screw A. (fig.2)
2) Make 4 holes on the wall near the anchoring slots located at the corners of the internal part of the wall-base
and secure it with the screws and plugs supplied. (fig.3)
3) Close the wall-base.
4) Connect the plug to the socket.
For in-wall installation:
Once the wall-base is opened, introduce the cable coming from the electric network in hole B in the rear base
and connect it to the power terminal, disposing of the cable supplied.
DIRECTIONS FOR USE
- The main swich F (fig.1) located in the wall-holder connects the appliance (ON position) or disconnects it (OFF
position).
- The push-button C (fig.3) is a safety device: the air dryer does not work if it is not pressed down.
- Air flow and temperature can be adjusted by the switch G (fig.3) located on the handgrip:
II - MAX position - high power - max. air flow
I - MIN position - low power - min. air flow
- The model is fitted also with an electrical socket (220V/110V). The shaver socket has to be utilized only for
shavers: never connect other appliances like coffee machines or heaters.
In the event of an internal temperature overload, a thermostat with automatic reset function to protect the
heating element will temporarily suspend heating element and motor operation.
This device guarantees increased operating safety.
SAFETY AND MAINTENANCE INSTRUCTIONS
- Make sure that the voltage of your electricity supply is the same as indicated on the appliance's rating plate
on the handgrip.
- Always switch off the hair dryer for cleaning.
- Care should be taken to prevent hair from entering the rear grill and check it is free of dust.
- When in use, do not use spray products.
- Clean the plastic parts by a wad moistened with water and soap. Do not use abrasive products.
Should the above instructions not be followed or in case of inadequate use, the manufacturer will not be
responsible for damages to people or things.
GENERAL WARNINGS
• Do not use this product for anything other than its original purpose, and therefore as hair dryer for hotels
• Do not leave the device exposed to the elements such as rain, sun, etc...
• Do not make any sort of changes to the device
• Do not obstruct the air outlet
• Do not obstruct the air inlet grid
• Do not introduce any object inside the grid or air outlet
• In case of failure and/or malfunctioning disconnect the device from the mains power and contact the
manufacturer or retailer.
• The appliance is not suited for persons (as well as children) physically, mentally, sensory disabled, or with no
experience, unless they have been supervised or directed by someone responsible of their safety.
• If the power supply cord is damaged avoid to use it. Let the Manufacturer or some similar qualified person
replace it, in order to avoid any risk.
• The appliance is not suited for persons (as well as children) physically, mentally, sensory disabled, or with no
experience, unless they have been supervised or directed by someone responsible of their safety.
• If the power supply cord is damaged avoid to use it. Let the Manufacturer or some similar qualified person
replace it, in order to avoid any risk.
GUARANTEE
This appliance is guaranteed for a period of two years from the date of purchase to be proved by a purchase
receipt or an invoice together with the dealer stamp.
This guarantee does not cover the damage resulting from:
* Misuse of the appliance, incorrect use or negligence.
* Accidental breakages due to transport or appliance fall not imputable to the supplier.
* Wrong connection to a voltage other than the one specified, voltage fluctuations on the mains.
* Improper tampering with appliance.
The appliances to be repaired during the period of guarantee must be sent to the manufacturer carriage
paid.
5
Werbung
Inhaltsverzeichnis
