Installation Location; Power Supply - Weframe One Installations- & Wartungsanleitung

Exceeding the tipping point or accelerating on
slopes can cause you to lose control and the device
to fall over, resulting in equipment, property
damage, and / or personal injury.
Never tilt the stand.
Do not move the product over steep ramps or other
inclines.

Installation Location

The product could start rolling or tipping on uneven
surfaces, causing personal injury and / or equipment
and property damage.
Do not place the product on sloped surfaces.
Place the product on a flat and stable surface.
Ensure that the surface has sufficient load-bearing
capacity.
Spontaneous heavy or even permanent low
mechanical impact can lead to damage and thus to
malfunctions and a shorter service life.
Do not expose the product to shaking, shocks, or
significant vibrations.
Ensure that there are no sources of vibration near
the product (e.g. other electrical devices, fans,
generators, etc.).

Power Supply

Touching the power plug with wet hands can cause
electric shocks.
Do not touch the power plug with wet or damp
hands.
The use of power cords not included with the
product may cause electric shocks or short circuits,
resulting in amage to the product or personal
injury.
Do not replace or exchange the supplied power
cord with other products.
Use only the supplied power cord.
Only use the supplied power cord with the
Sessionboard and not with other devices.
ENGLISH
On surfaces that are too soft or not very durable,
the product could cause damage to the surface or
become unstable.
Do not push the product over floors that are too
soft.
Only move the product on surfaces with sufficient
load-bearing capacity.
Keep the total weight of the product in mind when
considering the total load capacity of the floors
and the durability of any carpeting.
Do not place the product within the range of
opening / closing doors or other moving objects.
Loose and unmarked cables increase the risk of
tripping and could cause property / equipment
damage or injuries to users.
If possible, lay power and network cables behind
and next to the product.
Ensure that all cables running along the floor are
properly tied and labeled.
The product could fall over and injure children.
Make sure the device is installed out of the reach of
small children.
Damaged or unsuitable plugs / connectors could
cause electric shocks or short circuits.
Do not use damaged power cords, sockets,
or plugs.
Do not use multiple devices on one power strip.
Only connect the product to suitable
plugs / connectors.
Use only grounded power outlets.
Completely insert the power cord's plug into the
outlet.
Wipe off any dust that may have accumulated on
the power cord and / or plug with a dry cloth.
51