Installation And Operation; Transporting The Device - Weframe One Installations- & Wartungsanleitung

Installation and Operation

Improper use may result in damage to the product
or personal injury.
Do not perform any unauthorized assembly or
repair work on the product.
Do not disconnect the display from the stand,
e.g. by trying to lift it out.
Do not open the display housing or any other screw
connections.
Always have repairs carried out exclusively by
weframe support or weframe-authorized dealers.
Overheating could affect the use of the product
and reduce its service life.
Do not expose the product to excessive sunlight.
Keep the product away from heat sources such as
stoves, heaters, or open fires (e.g. candles, etc.).
Inadequate or improper ventilation could lead
to overheating, resulting in malfunctions and a
shorter service life.
Do not place or operate the product in poorly
ventilated areas or in enclosures (cabinets or
similar).
Ensure that the product is ventilated with air that
is free of dust and grease.
Always keep the product's ventilation openings
clean and free of objects.
Immediately remove any obstructing objects,
coverings, or dirt from the ventilation openings.

Transporting the Device

Mechanical stress can lead to damage and thus to
malfunctions and a shorter service life.
Do not subject the product to severe shocks,
vibrations, or impacts.
Do not move the product over uneven surfaces
(e.g. cobblestones or similar) using its mobile stand.
Do not use the mobile stand to move the device
over large steps or stairs.
50
Moisture and dirt could cause electric shocks or
short circuits.
Never use / operate the device with wet hands.
Ensure that the product is not operated near
humidifiers, indoor fountains, or other sources of
humidity.
Do not operate the device in or near dusty or
greasy environments such as workshops or
kitchens.
Do not expose the product to rain or other
excessive moisture.
Ensure that the product is installed and operated
in a dry place.
Keep the product clean.
If there are large changes in ambient temperature,
condensation could form in the product and result
in malfunctions and a shorter service life.
Do not allow condensation to form on or in the
device.
Leave the product switched off for a longer period
of time after changing locations with temperature
fluctuations (e.g. after being transported or moved
from storage to the installation location).
If possible, avoid changes of location with
significant temperature fluctuations by selecting
an appropriate installation or storage location.
Allowing a single person to move the product may
result in uncontrolled movements, causing personal
injury and / or equipment and property damage.
Always move the product with at least two people.
Only move the product with one person on each
side of the product.
Be sure to push and steer in a coordinated manner.