Installation Of The Camera - Spypoint LINK-EVO Anleitung

START THE CAMERA
We strongly suggest to slow format your SD card in a
computer, even more if it has been used in another electronic
device.
1. Turn the camera ON
Use the ON/OFF switch to turn the camera ON.
2. All lights flashing - Searching for signal
The signal search can take few minutes to
process. If only 1 blue bar is flashing, the
network test was unsuccessful. Get outside
or near a window to maximize signal
strength and restart the camera. This
operation might need to be repeated as the SPYPOINT
SIM card and services are powered by multiple
providers. The network modem will manoeuvre to
ensure strongest signal strength by searching for the
best tower available (cell network).
3. Solid blue bars - Signal strength
Once the network test is completed, blue bars
will stabilize showing the signal strength. Note
that signal bars displayed on the camera can
differentiate of those shown on other cellular
devices as there is no industry standards and
practice to label DBM values to a specific number of
bars.
4. Red light flashing (30 s) - Installation delay
The test light in front of the camera will flash for 30
seconds to allow the user to leave the area without being
photographed or recorded.
20
5. All lights OFF - Camera ready
The camera has sent a picture and updated its status in
the LINK app with it's latest information. The camera is
now ready to take pictures and transmit them to your
LINK app upon the next synch. Synchs are set by default
to every 4 hours from midnight.

INSTALLATION OF THE CAMERA

Install the camera with or without the mounting
bracket:
Recommended installation height:
The camera should be installed at the same height as
the animal's mid-body.
Ideal installation for quality pictures & videos:
The targeted animal should be 25 feet / 7.5m away from
the camera for a better field of view.
To get brighter pictures at night , you should have
elements in the background to reflect back the IR flash to
the camera.
Note that the camera should not directly be facing the sun
to avoid back lighting and false detection.