Spypoint LINK-EVO Anleitung Seite 13

SETTING THE APP
The LINK App let you configure all the camera's settings.
Theses new settings will take effect the next time the
LINK camera connects to update it's status. Here are the
most important settings, there is more are available in
the app.
BASIC SETTINGS
MODE - PHOTO
Delay: Sets the time interval between each de-
tection before the camera records the next
photo.
Multi-shot: Takes up to 2 consecutive shots at each de-
tection, with a 5 second delay between each
photo.
MODE - TIME LAPSE
Interval: This option allows the camera to take photos
at regular preset intervals without detection.
MODE - VIDEO
Delay: Sets the time interval between each
detection before the camera records the
next video.
Photo first: When this option is enabled, a photo is
taken immediately before each video.
Video length: Allows the user to select the duration of
the recording.
TRANSFER SETTINGS
First transfer time: Allows the user to choose at what
time of the day the camera commu-
nicates for the first time.
Transfer frequency: Allows the user to choose the num-
ber of synchronizations that the
camera performs daily.
ADVANCED OPTIONS
illumination modes comparison*
Night mode: Allows the user to set the best option for
photos.
optimal
MODE
Battery life 

Flash range
Blur reduction 
* Available for photos only
Schedule: Allows the user to set the period of
operation of the camera for each day of
the week. The start and stop time are the
hours during which the camera is in action
and can record pictures or videos. For an
activation of 24 hours, the same start and
stop time must enter 00h00 or 12 H AM.
(Night modes)
IR-boost
MODE


 
19