Spypoint LINK-EVO Anleitung Seite 11

PREPARATION
REMOVE THE CAMERA FROM THE MOUNTING
BRACKET
• Push the tab to release the camera from the mounting
bracket.
• Remove the camera.
FINDING THE SIM ID
The SIM ID number can be found in the battery case.
You will need this number to complete the registration of
the LINK-EVO camera and connect to the application.
CHOOSE A POWER SOURCE
R6 (AA) BATTERIES
This camera can be
powered by 8 R6 (AA)
batteries (1.5V). The
use of alkaline or lithium
batteries is recommended.
Be sure to insert the AA batteries according to the
polarity indications (+) and (-).
To ensure maximum performance of the camera and
prevent battery leaks, we recommend the use of new
batteries. Make sure to insert each battery with the correct
polarity. (Negative or flat end against the metal spring
plate) Do not mix battery type - use ALL alkaline or ALL lithium. Do
not mix old and new batteries. Rechargeable AA batteries are not
recommended as the lower voltage can cause operational issues.
LITHIUM BATTERY PACK
#LIT-09 / No.SP0079 - No. 690911
(battery only) or
#LIT-C-8 / No.SP0080 - No. 690910
(LIT-09 Battery & Charger)
This camera can be powered
by a rechargeable lithium
battery pack LIT-09/LIT-C-8
(sold separately). This type
of battery is less affected by
cold temperatures and lasts up
to 2 times longer than alkaline
batteries.
EXTERNAL (12V)
This camera can also be
powered by an external
12-volt DC input such as a
12-volt battery (KIT-12V,
BATT-12V or KIT6V/12V) or
a 12-volt adapter (AD-12V),
sold separately.
DC 12V
17