Using Mini Heki S
See fig. a
➤ Fit the inner frame into the mounting frame.
See fig. b
➤ Push the inner frame onto the mounting frame.
➤ After installing, check the roof light works properly.
➤ Remove the protective film from the acrylic glass.
NOTE
I
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
➤ If necessary, enter the new vehicle height and weight in the vehicle doc-
uments.
8
Using Mini Heki S
8.1
Opening and closing the Mini Heki S (fig. c to
fig. e)
➤ Open and close the roof light as shown.
8.2
Opening and closing the roller blinds (fig. f)
NOTICE! Risk of damage due to a build-up of heat between
A
the roller blind and the window.
In strong sunlight, only close the blackout roller blind two thirds of
the way.
NOTE
I
You can adjust the blackout roller blind and the flyscreen
separately.
➤ Hold the recessed handle of the roller blind and pull it into the required po-
sition.
14
All manuals and user guides at all-guides.com
Mini Heki S
EN