Requirements On The Installation Location - Graef HB 802 Bedienungsanleitung

supervised or have been instructed in the safe use of the unit, and in
addition understand the resulting dangers.
- Children must not play with this unit.
- The unit is not intended to be used with an external timer or a separate
remove control.
- Packaging materials must not be used for playing. There is a danger of
suffocation.
- In the absence of supervision and prior to assembly, disassembly or
during cleaning, always disconnect the unit from the mains.
- Keep the unit away from heat and sharp edges which might cause dam-
ages.
- Keep the unit away from other heat-producing devices.
- Do not immerse the unit in water or other liquids.
- Do not operate the unit with wet hands.
- Do not store the unit in direct sunlight or at high humidity.
- Avoid contact with moving parts. During operation, keep hands, hair,
clothing as well as spatula and other utensils away from knives in order
to reduce the risk of injuries of persons and/or damages to the devices.
A spatula may be used, but only if the unit is not in operation.

REQUIREMENTS ON THE INSTALLATION LOCATION

For safe and fault free operation of the unit, the following requirements of the
installation location have to be met:
- The unit has to be placed on a solid, flat, horizontal, and non-slipping surface
with a sufficient weight-carrying capacity.
- Make sure that the unit cannot topple over.
- Choose the location in such a way that children cannot reach the blade of
the unit or the supply lines.
- Never use the appliance outdoors, and always keep it in a dry place.
- Do not set up the unit in a hot, wet or moist environment.
- The socket has to be easily accessible so that the power cable can be re-
moved easily in case of emergency.
32