aponorm Microlife Bedienungsanleitung Seite 45

zur Verfügung gestellt von Gebrauchs.info zur Verfügung gestellt von Gebrauchs.info
Other possible malfunctions and their elimination Other possible malfunctions and their elimination Other possible malfunctions and their elimination
If problems occur when using the device, the following points should be checked
and if necessary, the corresponding measures are to be taken:
Malfunction
The display remains empty
when the instrument is
switched on although the
batteries are in place.
The device frequently fails to
measure the blood pressure
values, or the values
measuredare too low (too
high).
Every measurement results in
different values, although the
device functions normally and
normal values are displayed.
The blood pressure values
measured differ from those
measured by the doctor
Aktualisierungsstand Gebrauchs.info November 2011
Remedy
1. Check batteries for correct polarity and if
necessary insert correctly
2. If the display is unusual, re-insert batteries or
exchange them.
1. Check the positioning of the cuff.
2. Measure the blood-pressure again in peace
and quiet under observance of the details
made under point 5.
• Please pay attention to the following
information as well as the points listed under
«Common sources of error» and repeat the
measurement.
• Record the daily development of the values
and consult your doctor about them
41