Reading The Set Date; Setting The Time And Date - aponorm Microlife Bedienungsanleitung

4.2. Reading the set date

4.2. Reading the set date 4.2. Reading the set date
Please press the «Time» key.

4.3. Setting the time and date

This blood-pressure monitor incorporates an integrated clock with date display. This
has the advantage, that at each measurement procedure, not only the blood-
pressure values are stored, but also the exact moment of the measurement.
After new batteries have been inserted, the clock begins to run from the following
setting: 1997-01-01 00:00 O'clock.
You must then re-enter the date and current time. For this, please proceed as
follows (Example: Entering 1998-06-15 Time 09:30 o'clock):
1) Press the TIME button for at least 3 seconds.
The display now indicates the set year, during which
thelast two characters blink.
2) The correct year can be entered by pressing the
MEMORY button. (Example: 1 x press)
3) Press the TIME button again. The display now
switches to the current date, during which the first
character (month) blinks.
4) The corresponding month can now be entered by
pressing the MEMORY button. Example: 6 x presses)
34
Aktualisierungsstand Gebrauchs.info November 2011
zur Verfügung gestellt von Gebrauchs.info zur Verfügung gestellt von Gebrauchs.info zur Verfügung gestellt von Gebrauchs.info