Putting The Aponorm ® Blood-Pressure Monitor; Inserting The Batteries - aponorm Microlife Bedienungsanleitung

zur Verfügung gestellt von Gebrauchs.info
4. Putting the aponorm
into operation

4.1. Inserting the batteries

After you have unpacked your device, first insert the batteries. The battery compart-
ment is located on the left lateral side of the device (see illustration).
a) Remove cover as illustrated
b) Insert the batteries (2 x size AAA 1.5V), thereby observing the indicated polarity.
c) If the battery warning appears in the display, the batteries are empty and must
be replaced by new ones.
Attention!
• After the battery warning appears, the device is blocked until the batteries have
been replaced.
• Please use «AAA» Long-Life or Alkaline 1.5V Batteries. The use of 1.2V Accumu
lators is not recommended.
• If the blood-pressure monitor is left unused for long periods, please remove the
batteries from the device.
Functional check: Press and hold the0/Ibutton to test all the display elements.
When functioning correctly all segments appear.
Aktualisierungsstand Gebrauchs.info November 2011
blood-pressure monitor
®
33