Navitel MR450 GPS Benutzerhandbuch Seite 32

Navitel DVR Center app installation
1. Download and install Navitel DVR Center to your cell phone or tablet,
follow your mobile device instructions. You can download application
by scan QR code in DVR's Menu (App QR Code) with your cell phone.
Choose Wifi in Settings menu, press On.
2. Turn on a Wi-Fi in DVR's Menu (Wi-Fi) and in your mobile device settings.
3. Run the app. Choose your DVR in the list. The DVR's information is in
DVR's Menu (Wi-Fi Navitel).
4. Connect your mobile device to the DVR through Wi-Fi. If necessary use
the password. You can change it in DVR's Menu (Wi-Fi password).
5. Using the Navitel DVR Center you can:
• update DVR's firmware;
• control DVR functions in Settings menu: configure parking mode,
impact sensor, video mode and format your SD card;
• save, view, delete and send videos and photos as well as watch
DVR's video in real time on the mobile device screen.
Digital Speed & Camera Info
The Digital speed feature is used to display time and vehicle speed
calculated with the help of GPS signal [1]. Modes:
• Speed – current speed is displayed constantly [B],
• Speed + time – current speed [B] and time [C] are displayed.
The Camera info feature notifies the driver about cameras and warnings
(hereinafter – Cameras) along the way. When you turn on the Camera
info, the current speed and time are displayed. With the approach to the
nearest camera the following information is displayed [2]:
• current speed [B],
• camera icon [D],
• dynamic progress bar indicating approach to the nearest camera [E],
• distance to the camera [F].
All information is displayed on a black screen.
•
In Record mode (REC), REC or
If the vehicle is still, 0 is displayed.
If there is no GPS-signal, – – – [3] is displayed.
Note. A weak GPS signal may be caused by bad weather conditions and
other external factors. Please consult your vehicle speedometer.
[1]
NAVITEL MR450 GPS
•
are displayed [A].
[2] [3]
| 31
EN