Navitel MR450 GPS Benutzerhandbuch Seite 31

30 | USER MANUAL
Power Off
Stamp
LCD OFF
Protect Level
EN
Parking monitor
GPS location
Rear camera mode
Select a view mode.
Choose the period of inactivity after which the device will turn off automatically.
This function adds date stamp to the record.
The device can automatically shut off the screen to reduce power consumption. Time interval can be set in the LCD
Power Save menu.
If the vehicle is hit by something, the DVR will automatically lock the current video.
In shutdown state, if vibration is detected, the device will turn on automatically and start recording. The file will be
protected (locked).
Device supports built-in GPS chipset and GPS antenna, it can show longitude, latitude and other information on
your current location. Press GPS Status to check GPS dates. Press On in the GPS Stamp menu to add GPS information
to your files.
When supplying 12 V to the red wire, the rear camera mode is activated. Recommendations on how to connect this
wire is given on the Rear Camera page of this manual.
Pressing the top-right quarter of the screen switches the camera view modes: front only; only back; back over front
(picture-in-picture).