Child-Lock Function - N'oveen HC1500 Benutzerhandbuch

2. Press " " button, the "AUTO" (HC1500/HC2000/HC2050) or "
(HC2100/HC2500/HC3100/3200) "Auto/M" (HC2200) light is on. The appliance is working
as smart saving energy models. (In this function, the appliance is checking and recording
environment temperature. It will stop working, when the temperature drops 3 . The user
should restart the appliance with "ON/OFF" button)
3. Press " " button again, the "AUTO" (HC1500/HC2000/HC2050) or "
(HC2100/HC2500/HC3100/3200) light is off. Window Open Function is off.
7) DELAY FUNCTION (HC1500/HC2000/HC2100/HC2500/HC3100/3200)
1. This function can be used in when:
- the appliance is in the standby state.
- before the appliance working.
- this function only works through remote control.
2. Press " " button, the LED light is on display, then press "
"Delay" light and "I/W" light are on. Press "
o'clock, 24=24 o'clock...00=off)
---------------------------------------------------------This is open time
3.Press " " button again, the "Delay" light and "II/H" light are on. Press "
Hours from 01--24 (01=1 o'clock, 24=24 o'clock...00=off)
---------------------------------------------------------This is close time
PS: Press " " button, screen shows number that will twinkle for 5 seconds, you should
operate in this time, otherwise appliance will get back to standby. (This function is one-time
and must be reset after the power is cut off.)

8) CHILD-LOCK FUNCTION

1. This function works only through remote control. When appliance is plugged in, this
function can be used in any mode.
2. Press " " button one time, all lights and LED display are closed, only "Power" light is
on. In this condition, both control panel and remote control are inactive.
3. Press " " button again, all lights are on and control panel and remote control are active.
" to set the Hours from 01-24 (01=1
34
"
≧ ℃
"
" button one time, the
" to set the