Timer Function - N'oveen HC1500 Benutzerhandbuch

(HC2200) or (HC3100/3200) lights are on.
4. Press the "MODE" button third time, the unit will blow the cold air and "Fan/M" light is on.
PS: Control panel and remote control are operated the same way.
PS (HC2100):On control panel " " button, press 1 st time: COOL AIR; 2 nd time: WARM
AIR; 3 rd time: HOT AIR; 4 th time: SWING FUNCTION; 5 th time: OFF.
3) 24H TIMER FUNCTION
1.Turn on the appliance in fan, warm, hot mode. Control panel "TIMER" button
(HC1500/HC2000/HC2050/HC2200) or " " (HC2100) and remote control " " work the
same way.
2. Press "TIMER" button (HC1500/HC2000/HC2050/HC2200) or " " (HC2100) or
(HC2500/HC3100/3200), set the timer up to 24 hours, keep pressing "TIMER" button to
increase the hours from 00--24 (00= off, 01=1hour, 02=2 hours...24=24 hours) and the
"TIMER" (HC1500/HC2000/HC2050) or " " (HC2100/HC2500/HC3100/3200) or "24h/H"
(HC2200) light is on.
PS: "00" set means no timer is set, the "TIMER" (HC1500/HC2000/HC2050) or " "
(HC2100/HC2500/HC3100/3200) or "24h/H" (HC2200) light is off.
4) THERMOSTAT INSTRUCTIONS
1. Turn on the appliance in fan, warm, hot mode. This function only works through remote
control.
" to set the desired temperature between 10-49 . ℃
2. To adjust temperature, press "
3. When the air temperature drops 2 degree below the set temperature, the heater will start
heating with "I/W" (1000W).
4. When the air temperature drops 4 degree below the set temperature, the heater will start
heating with"II/H" (2000W).
5. When the air temperature 1 degree higher than set temperature, the heater will blow the
cold air.
5) WEEK TIMER FUNCTION (HC1500/HC2000/HC2050/HC2200)
1. Turn on the appliance in fan, warm, hot mode. This function only works through remote
control.
2. WEEK Press " " button, "I/W" and "W-Timer" lights are on, "1" means "Monday".
HOUR Press " " button 2nd time, "II/H" (HC1500/HC2000/HC2050) or "24h/H" (HC2200)
lights on, press " " to set the Hours from 01--00 (01=1 o'clock, 02=2 o'clock...00=24
31