Fast Forward And Rewind; Playback Mode; Repeat A Single Track; Repeat All Tracks - X4-TECH Bobby Joey CD Bedienungsanleitung

• pressing briefly on F.SkIp (see 28.11) you can skip to the next
track. pressing this button repeatedly, you can skip several tracks
until the desired track number is shown on the display.
• pressing briefly on B.SkIp (see 28.10) you will return to the
beginning of the current track.
• To skip back multiple tracks, press B.SkIp (see 28.10) repeatedly.

Fast forward and rewind

press and hold F.SkIp (see 28.11) or B.SkIp (see 28.10) to move
fast forward or backward within the current track. The volume
will be muted during this operation.

Playback mode

By pressing REpEAT (see 28.14) the playback mode can be
toggled. The indication of the adjusted playback mode takes
place with the decimal point following the first digit on the
display.
To cancel the playback mode, press repeatedly REpEAT (see
28.14), until the decimal point following the first digit on the
display disappears.

Repeat a single track

press REpEAT (see 28.14) once to repeat the current track
continuously. In this mode, the decimal point following the first
digit is flashing.

Repeat all tracks

press REpEAT (see 28.14) twice to repeat the complete CD
continuously. In this mode, the decimal point following the first
digit lights up permanent.
34

Program playback

Up to 20 tracks can be programmed to be played in a specific
order.
• press pRoGRAM (see 28.13) once while in playback or stop
mode. „00" on the display will be flashing.
• Select the desired track with B.SkIp (see 28.10) or F.SkIp (see
28.11).
• Store the track with pRoGRAM (see 28.13). The program number
will be increased by one and shown on the display for a short
period of time.
• Repeat steps 2 and 3 to program up to 20 tracks.
• press pLAY/pAUSE (see 28.9) to start the playback of the tracks in
the programmed order.
• Stop the programmed playback by pressing STop (see 28.12).
• In stop mode, press pRoGRAM (see 28.13) and pLAY/pAUSE (see
28.9) afterwards, to continue the programmed playback.
• After pressing pRoGRAM (see 28.13) while in stop mode, you can
check the programmed track numbers via B.SkIp
(see 28.10) or F.SkIp (see 28.11).
• Delete the programmed sequence by opening the CD door or
turning off the CD player via oFF.VoL (see 28.17).

Karaoke function

The device is equipped with two coequal microphones.
• Turn the device on by rotating the oFF.VoL-knob clockwise.
• place a CD on the center spindle with the cover faced up and
close the CD door (see 28.4).
• press pLAY/pAUSE (see 28.9) to start the playback.
• Slide the oN/oFF button (see 28.5) on the microphone to the
oN position.
35