Power Supply; Battery Operation; Operation With Ac/Dc Power Adapter - X4-TECH Bobby Joey CD Bedienungsanleitung

Power supply

a. Battery operation
open the battery compartment by loosen the screw on the
cover and remove the cover. Insert 4x 1.5 V Type-C Batteries (not
included in delivery). Make sure to follow the polarity markings
inside the battery compartment. Now put the battery compart-
ment cover back in place and fix it with the screw.
• Never mix old and new batteries.
• Never mix rechargeable batteries with other types of batteries.
• Always remove used batteries.
• Non-rechargeable batteries must not be recharged.
• Batteries have to be removed before charging.
• Batteries have to be charged under adult supervision only.
• The supply terminals must not be short-circuited.
• Never mix different types of batteries.
b. operation with AC/DC power adapter
Before connecting the AC/DC power adapter (not included in
delivery) make sure that the voltage on the label corresponds to
the voltage in your household.
• only use a common power adapter with 6 V / 600 mA.
• Connect the power adapter with the DC 6 V jack (see 28.16).
• when the device is powered via a power adapter, the batteries
will be disconnected automatically.
• power supplies are available in specialized shops.
• only use the device with the recommended transformer.
• Equivalent to CE directive 15.
30
The device must not be connected to more than one
power supply.
wrong usage of the transformator may lead to electric
shock. The transformator used for this toy has to be
checked for damages to the housing, connector, cable
and other parts. If there is any damage, the transforma-
tor must not be used.
If there is any doubt in the safety of this device (e.g.
because of damage to the enclosure, cables, an optional
power adapter or the internal transformer), the device should not be
used until the damage has been properly removed.
This device may only be connected to a 6 V, 5 w AC/DC
adapter with negative pole at the inner conductor of
the plug. The usage of other kinds of power adapters
may damage the device.
Make sure the power supply plugs polarity corresponds
with the input jacks on the device.
31