Cleaning And Maintenance - Bestron ACV2000 Gebrauchsanweisung

instruction manual
use -
location
Place the convector heater on a stable surface in the room to be heated.
The heater heats the air flowing past the appliance. For this reason, the best
place for the convector heater is 20 to 25 cm in front of a window. An air flow
is generated by the cooling of air passing the window and the heating of air
passing the convector heater; see figure 3.
Make sure that air can pass through the heater easily. For this reason
the top and bottom of the convector heater must always remain
unobstructed. Never hang clothing, etc., over the convector heater to dry.
The heat produced by the heater could readily result in a fire.
use
1. Rotate the thermostat dial to "O".
2. Make sure the function dial is set to "0".
3. Insert the plug into the plug socket.
4. Use the function dial to select the desired setting.
Button a = 1250Watt
Button b = 750Watt
Button a+b = 2000Watt
5. Rotate the thermostat dial towards the "MAX" setting. The appliance will turn itself on, a click will be
heard and the On/Off indicator light will be lit. The temperature is increased by turning the thermostat
dial further.
6. Switch on the turbo fan if you wish to distribute the heat through the room quickly.
You can also use the turbo fan to distribute cold air. By only switching on the turbo button.
7. Switch the appliance off after use by turning the function dial to the "0" position and remove the plug
from the wall socket. Set the thermostat dial to the "O" setting again.
To find the ideal thermostat setting, rotate the thermostat dial clockwise as far as possible. Once the
room has reached the desired temperature, slowly rotate the dial anticlockwise until a click is heard.
The appliance will then turn itself off. The temperature control will ensure that the room remains at the
set temperature.
• Never cover the air inlet or the air outlet.
• The thermostat switches off the heating element and the turbo fan once the desired temperature
has been reached.
• The convector heater is fitted with an overheating safeguard. The convector heater will be switched
off automatically if the appliance's internal temperature becomes too high. The overheating
safeguard will be disabled once the appliance has cooled down sufficiently and the convector
heater can then be used again.

cleAning And MAintenAnce

• Remove the plug from the plug socket and allow the convector heater to cool down.
• Clean the convector heater with a damp cloth. If necessary, use a little washing-up liquid to clean the
convector heater. Make sure no moisture enters the convector heater.
• Dry the appliance thoroughly after cleaning.
• Never immerse the appliance in water.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
tHe enVironMent
• Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to
the symbols on the product, the user's instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.
Figure 3
17