Operation - Use; Cleaning And Maintenance - Bestron ARA9 Gebrauchsanweisung

operAtion - installation
1. Place the oil radiator upside down.
2. Hook the U-clip at the bottom of the radiator around the connection between the first and second fins.
3. Insert the screw thread of the U-clip through the holes of the wheel bracket.
4. Screw the wing nut onto the screw thread of the U-clip so that the wheel bracket is firmly attached.
5. Repeat steps 3 to 6 for the second wheel bracket between the last and the one from last fins.
6. Place the radiator upright on the wheels.

operAtion - use

1. Place the radiator on a flat surface.
2. Set the setting dial to position '0' (Off).
3. Insert the plug into the plug socket.
4. Turn the settings switches to one of the following settings:
0 Off
I Low power (800 watt)
II Medium power (1200 watt)
I + II Combined (2000 Watt)
5. Rotate the thermostat dial towards the 5. mark until a click is heard and the indicator light is lit. The
oil radiator will now become warm.
6. Rotate the dial further towards the 5. mark to adjust the temperature. The automatic temperature control
will ensure that the room remains at the set temperature.
To find the ideal thermostat setting, rotate the thermostat dial as far as possible towards the 5.
mark. Once the room has reached a comfortable temperature, slowly rotate the dial towards the 0.
mark until a click is heard. The heater will then turn itself off. The temperature regulator will ensure that
the room remains at the set temperature.
7. Turn off the oil radiator by rotating the setting dial to the '0' setting.
The fan heater is equipped with a tip over protection. This ensures that the appliance stops heating as
soon as it has fallen down. Place the fan heater upright and it will start heating again.

cleAninG And mAintenAnce

1. Remove the plug from the wall socket and allow the appliance to cool.
2. Clean the exterior of the housing with a damp cloth and rub it dry with a clean cloth.
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
the enVironment
• Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user's instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.
20
instruction manual