Water Tank - Meaco Arete One Bedienungsanleitung

Water Tank

The dehumidifier can be used to collect water in one of two ways: via the water tank or via continuous
drainage. For general use in the home customers tend to use the water tank to collect water. For more
information on how to use continuous drainage, see pages 12 and 13.
When the water tank is full and requires emptying, the dehumidifier will turn off, bleep five times and
the water tank full indicator will light up solid. To empty the water tank, simply pull the water tank out
from the dehumidifier and empty the water. The handle can be used to make it easier to carry the water
tank. Use the pouring holes on the left or right corner of the water tank to empty the water (the water
tank lid does not need to be removed).
The water collected can be used to water non-edible plants only – do not consume.
Cleaning the water tank
If you want to clean the inside of the water tank, the water tank lid needs to be removed – simply lift
the lid off the water tank.
Water tank float
Located inside the water tank is a float. It is essential that the float is NOT removed from the water tank.
The float measures the level of water in the water tank and triggers the sensor to turn the dehumidifier
off when the water tank is full. If the float is removed from the water tank, the dehumidifier will not run.
Float
11