Werbung
Verfügbare Sprachen
Verfügbare Sprachen
D I R E C T I O N S :
Please follow these operating instructions!
In case of improper application, the destruction of the component parts,
bearing or tools can result, where the guarantee is voided.
R E M OVA L :
Prior to commencement of work, the transmission support stays must be removed!
•
Step 1: Mount the fixing bracket (No.7 with No.8) on the engine support with the fastening
screws (No.13).
•
Step 2: Mount the adjusting bracket (No.9) as indicated in the illustration below and adjust the
fixing bracket (No.7) with the fixing piece (No.8) so that the bearing is not damaged through
tilting with removal and installation.
•
Step 3: Now place the removal pressure pad (No.4) onto the upper double bearing. Displace the
pressure pad removal / installation (No.2) and the removal bell (No.3) onto the extension spindle
(No.11). Then insert through the double bearing and the removal pressure pad (No.4). Bring the
removal tool to the system with the nut (No.12) and the forcing nut (No.15). Now the double
bearing can be removed.
3 0 2 5 0 1 L
9
Werbung
