Panasonic LUMIX DC-GH5M2 Bedienungsanleitung Seite 24

Getting Started / Basic Operations
A
1
Connect the charger and the AC adaptor with the USB
connection cable.
• Check the direction of the terminals and plug in/out straight holding onto the
plug.
(Inserting these at an angle may cause deformation or malfunction)
2
Connect the AC adaptor to an electrical outlet.
3
Insert the battery.
• The charging lights ([CHARGE])
[CHARGE] Light Indications
Charging
0 % to 49 %
status
[CHARGE]
light
B Blinking
• If the [50%] light is blinking quickly, then charging is not occurring.
• When the battery is inserted while the charger is not connected to the power
source, the charging lights turn on for a certain period to allow you to confirm the
battery level.
24
DVQX2187 (ENG)
A
blink and charging begins.
50 % to 79 %
C On
80 % to 99 %
D Off
100 %