Connecting The Appliance To The Power Supply; Attaching The Flue Duct - Blaupunkt 5DW69250 Gebrauchs- Und Montageanleitung

Connecting the appliance to the power supply

Connecting the air extractor
Note: If using an aluminium pipe, smooth the connection area
beforehand.
Attach the air extractor pipe directly to the air-pipe connector.
1.
Connect to air extractor opening.
2.
Seal the joints appropriately.
3.
Connect the power supply
Plug the mains plug into the earthed socket.
1.
If a fixed connection is required, please follow the instructions
2.
in the Electrical Connection section.

Attaching the flue duct

:
Risk of injury!
Components inside the appliance may have sharp edges. Wear
protective gloves.
Separate the flue ducts.
1.
To do this, remove the adhesive tape
Remove the protective foil from both flue ducts.
2.
Screw the upper flue ducts to the sides of the fixing bracket
3.
using two short screws.
Place the lower flue ducts on the appliance and fix in place
4.
using two long screws on the bottom of the appliance.
Screw the lower flue duct to the sides of the fixing bracket
5.
using 2 short screws.
ª
Note: Align the flue duct before tightening the 2 screws.
¨
©
23