3.2
Boat assembly procedure
To assemble the inflatable boat properly, strictly observe the following
procedure, according to the model:
1°
Check the package content (refer to the list of the package
content indicated in section 3.1)
2°
Unfold the tubes in the inflating position
3°
Inflate the inner air chamber(s) grey valves
(if present)
4°
Install oars
APRIL 2021
Procedure
MODEL
HERCULES 200 240 290 310
HERCULES 200 240 290 310
HERCULES 200 240 290 310
HERCULES 200 240 290 310
67