Setting Current Date And Time (24 Hour Clock) - Mitsubishi Electric PV-PNS03ATL-GER Bedienungsanleitung

All manuals and user guides at all-guides.com

5.3.3 Setting Current Date and Time (24 Hour Clock)

Display panel
SETUP
DA E / T
1
T I ME
2 5 AUG 2 0 0 6
2
Flashing
T I ME
2 5 AUG 2 0 1 6
Flashing
3
T I ME
2 5 AUG 2 0 0 6
SETUP
DA E / T
4
Press the MODE switch several times
until the "SETUP" mode is displayed.
T ME I
・"SETUP" is displayed in the upper left-
Press the ENTER switch.
・The PV inverter becomes ready to
1 5 : 2 1 : 3 4
1. Each push of the SELECT switch will
1 5 : 2 1 : 3 4
2. Press the MODE switch.
・Now the first digit starts flashing (where
1 5 : 2 1 : 3 4
Then repeat the same procedure with the
MODE switch to choose the digit you wish
to set, causing it to flash. Press the
SELECT switch to bring up the number cor-
responding to the desired date and time.
Flashing
Press the ENTER switch to register
the date and time you have just set.
(The PV inverter reverts to step 1
T ME I
above.)
73
Procedure
hand side of the LCD. "DATE/TIME" is
displayed on the lower row, telling you
are in the date/time setting mode.
accept settings. "Hour, minute, sec-
ond" and "day, month, and year"
currently registered on the PV
inverter is displayed. The denary
digit starts flashing.
switch the number of the denary digit:
→ 1 → 2 → ...9 → 0
Select the number you want to set on the PV inverter.
you will set the desired number).
pp.1-48
pp.1-48
pp.1-48