English - Philips HQC486 Bedienungsanleitung

ENGLISH

6
2
1
All manuals and user guides at all-guides.com
Cleaning
Clean the appliance every time you have used it.
Do not use abrasives, scourers or liquids such as alcohol, petrol or
acetone to clean the appliance.
1 Make sure the appliance is switched off and disconnected from
the mains before you start cleaning it.
C
2 Remove the comb attachment.
C
3 Press the middle part of the cutting unit with your thumb until
the unit opens and then pull the cutting unit upwards to
remove it.
Be careful that the cutting unit does not fall to the floor.
C
4 Clean the cutting unit and the inside of the appliance with the
brush supplied.
C
5 Place the two lugs of the cutting unit into the guiding slots and
push the unit back onto the appliance.
6 Make sure you push the cutting unit back until you hear a click.
Replacement
A worn or damaged cutting unit should only be replaced with an
original Philips cutting unit.
C
1 Open the cutting unit by pressing the middle part and then
remove it by pulling it upwards.