Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Cleaning - Zelmer ZIS2415 ACTIVE Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16
Ironing Guide Chart
Below is a guide on the temperature setting required for different types of fabric, along with the
recommended iron method.
Marking
. (1 dot)
. . (2 dots)
... (3 dots) / MAX
Vertical Steam Ironing
This feature allows you to smooth out creases in garments or drapery in a similar manner to a garment
steamer. The high steam pressure of the Steam Station can provide bursts of steam while holding the
iron vertically. For best results, utilise on delicate or light fabrics. Only direct steam at hanging garments
in a safe area and ensure you always refer to garment manufacturer recommendations.
WARNING: DO NOT direct the steam onto a garment that is being worn or at any person.

MAINTENANCE AND CLEANING

Iron lock
The easy carry locker attached to the base unit can be used to transport the steam Station with ease.
To do so, lift it in an upward motion until it clicks into position. Before using the Steam Station, the easy
carry handle must be locked back into position against the base unit; press and hold the handle release
button and carefully lower it back to place.
Cleaning
Turn off the Steam Station and unplug at the power outlet.
Empty the water tank.
Regularly clean the ceramic soleplate with a damp, non-metallic washing pad.
Wipe the exterior of the Steam Station with a soft cloth.
Do NOT use abrasive cleaners, detergent or other chemicals to clean the Steam Station.
Change anti-scale cartridge
Replace the water softening cartridge regularly. At moderate use (twice a week) and depending on the
water hardness in your region the water softening anti-scale cartridge should be replaced every 3-6
months.
Note: Do not use the unit without the water softening cartridge!
1. Remove the water tank from the station.
2. Pull anti-calc cartridge upwards and remove it for changing. In order to remove it, firstly unscrew it and
carefully take it out. Disconnect the hose from the cartridge and connect it to the new cartridge. Screw
the new cartridge back to the water tank.
Note: Be careful - there can be water inside the cartridge body.
Install a new water-softening cartridge to its place.
Material, for example
Acetate, elastane, polyamide, polypropylene
Cupro, polyester, silk, triacetate, viscose, wool
Cotton, linen
EN
PL
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis