Safety Instruction - Zipper Maschinen ZI-STM350C Betriebsanleitung

 Hazard due to unintentional start-up of the machine: The power plug must be
removed from the socket-outlet prior to any check or action carried out at the machine!
 Hazard due to tile/stone chips & diamond blade :
During cutting operation the material /parts of the diamond blade may crack and and be catapulted
towards the operator. Therefore: never stand in-line with the saw blade during operation. Wear
protective goggles.
 Damage to hearing if ear-muffs are not used as necessary.
 Harmful emissions of tile/stone dust
 Hazard of severe injuries due to material kick-back.
Reduce the risk of kick-back by reducing the cutting speed.
12.3

Safety instruction

Please read the directions for use carefully and observe the information provided. It is important to
consult these instructions in order to acquaint yourself with the machine, its proper use and safety
precautions.
 Take due note of all this information before and whilst working with the machine.
 Do not lose these safety regulations.
 Use only quality diamond blades suitable for the respective material to be cut.
 The diamond blade has to be cooled during the cutting operation continuously.
 Do not force the motor, reduce feeding speed if necessary, do not let the develop such
pressure on the blade that the motor stops.
 Check the power cable regularly and have it replaced by an authorized specialist at the first
sign of any damage.
 When working outdoors, use only extension cables that are approved for outdoor use which
are marked accordingly.
 Always pull the plug out of the power socket before adjusting or servicing the machine.
 If you need to use an extension cable, make sure its conductor cross-section is big enough for
the saw's power consumption. Minimum cross-section: 1.5 mm²
 Do not leave the machine in the rain and never use it in damp conditions.
 Use the machine only at good lighting and in a well ventilated area.
 Keep children and unskilled persons away from the machine at all times. Operators have to be
at least 18 years old, or 16 under authorized supervision.
 Do not wear loose clothes or jewellery when the machine is in operation.
 Keep the working area clean and tidy. Keep it clean of wood scrap and d any unnecessary
objects.
 Wear proper safety accessories: Ear protection, protective eye-glasses and a breathing mask.
 Always work focused and avoid any sources of distraction. Do not work under the influence of
drugs, alcohol, or when you are tired.
 Always stick to the accident prevention and safety regulations valid for your working
environment.
 The machine has to be operated with a 230V isolated ground receptacle.
 Use and load the machine only within the borders of its power capacity. Do not use low-
powered machines for heavy-duty work. This poses besides shortened product life-span a
security risk!
 Control before every operation the machine and the security devices for good condition. Worn
or defect parts shall be replaced immediately.
ZIPPER MASCHINEN GmbH
ZI-STM350C
www.Zipper-Maschinen.at
SAFETY
16