Component Overview; Please Read First - Metabo TP 6600 Originalbetriebsanleitung

I_0007en4A.fm
ENGLISH
1.

Component Overview

8
2
7
6
5
4
8
1 Power cable with plug
2 Handle / lifting eye
3 Float switch (not for TP 6600)
4 Suction inlets
10
13.7.10
1
7
2
3
4
4 4
Operating Instructions
5 Pump casing
6 Discharge port incl. elbow with multi-
adapter
7 Float switch level control
8 Vent (position dependent on model)
2.

Please Read First!

– Read these instructions in full before oper-
ating. Pay special attention to the safety
instructions.
– These instructions are intended for per-
sons with basic technical knowledge in
handling tools such as the one described
here. If you have no
experience with this type of tool we
strongly recommend that you seek the ad-
vice of an experienced person before op-
erating this tool.
– If you notice transport damage while un-
packing, notify your supplier immediately.
Do not operate the tool!
– Dispose of the packing in an environmen-
tally friendly manner. Take to a proper col-
lection point.
– Keep all documents supplied with the tool for
future reference. Retain your proof of pur-
chase for any future warranty claims.
– If you lend or sell this tool be sure to in-
clude the documents supplied with the
tool.
– The equipment manufacturer is not liable
for any damage arising from disregard of
these instructions.
Information in these operating instructions is
designated as shown below:
A
Danger!
Risk of personal injury or environmental
damage.
B
Risk of electric shock!
Risk of personal injury from electric shock.
A
Caution!
Risk of material damage
3
Note:
Additional information.
– Numbers in illustrations (1, 2, 3 ...)