Citizen CT-S281 Benutzerhandbuch Seite 23

3.8 Full cutting label paper
When full-cutting the label paper with the printer installed horizontally,Be sure
that the guide plate is mounted on the paper exit of the printer cover.
(This guide plate was set to the printer at the time of factory shipment.)
The Guide Plate prevents cut paper from dropping in the printer.
CAUTION!
● If about 10 sheets of cut paper accumulate on the paper exit, remove the paper.
• Stacking of 10 or papers, paper jam may occur.
● Mounting and Dismounting Guide Plate
• Mounting
With the printer cover kept open, insert the tabs of the guide plate to one of
the mounting holes (either right or left hole) located at the inside of the
cover front. Set the guide plate with its lib facing toward you.
Then, with the guide plate warping toward you, insert the tabs to the
mounting holes at the opposite side of the cover.
• Dismounting
With the printer cover kept open, pull the center portion of the guide plate
toward you to remove the guide plate.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Lib
Tabs for
mounting hole
— 20 —
V10 CONSUMIBLES S.L.
Set similarly at the
opposite side.