Samson Stage 266 Bedienungsanleitung Seite 10

Quick Start Guide
Use the included ¼" to ¼" cable to connect
the SR266 receiver to a karaoke machine.
3. While holding the upper section
of the HT6 transmitter, rotate the
bottom section and slide down to
expose the battery compartment.
Insert a standard 9-volt alkaline
battery, being sure to follow the plus
and minus polarity markings.
4. Turn on the HT6 transmitter by sliding the POWER
switch to the right, and replace the bottom section.
10
1. Plugging the receiver into the wall.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.