Loading Door Lock; Changing The Selections After Programme Has Started - Beko WTV8737XSN1 Bedienungsanleitung

4.3.11 Loading door lock

There is a locking system on the loading door of the machine that prevents opening of the loading door in
cases when the water level is unsuitable.
"Door Locked" symbol appears on the display when the loading door is locked.
C
If the Remote Control Function is selected, the door will be locked. In order to open the door you must deactivate Remote
Start Function by either pressing the Remote Start button or changing the program position.
Opening the loading door in case of power failure:
C
In case of power failure, you can use the loading door emergency handle under the pump filter cap to open the loading
door manually.
A
WARNING:
loading door.

4.3.12 Changing the selections after programme has started

Adding laundry after the programme has started
If the water level in the machine is suitable when you press Start/Pause button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off
when the door lock is deactivated. After adding garments, close the door and press Start/Pause button once
again to resume the washing cycle.
24 / EN
Make sure that no water remains inside the machine to prevent overflow of water before opening the
• Turn off and unplug the appliance.
•
Open the pump filter cover.
• Remove the loading door emergency handle behind the filter cover with
a tool.
• Open the loading door by pulling the loading door emergency handle
downwards.
• Try to pull the handle downwards again if the loading door is not opened.
• Bring the loading door emergency handle to its original position after
opening the loading door.
:
Washing Machine / User's Manual