Symbols On The Machine; For Safe Operation - Timberpro WBC 520 Bedienungsanleitung

4. SYMBOLS ON THE MACHINE

For safe operation and maintenance, symbols are carved in relief on the machine. Be careful not to make mistakes
according to these indications.
The port to refuel the "MIXED PETROL"
Position: FUEL TANK CAP
The direction to close the air inlet = choke on
Position: AIR CLEANER COVER
The direction to open the air inlet = choke off
Position: AIR CLEANER COVER
Set the switch to " I " position, to start the engine,
STOP
set the switch to "O" position, to stop the engine
Position: right hand grip (on the left side)

5. FOR SAFE OPERATION

1. Read this manual carefully until you
completely understand and follow all
safety and operating instructions.
2. Keep this manual at hand so that you
may refer to it later whenever any
questions arise. Also note, if you have
any questions which cannot be answered
herein, contact the dealer from whom
you purchased the product.
3. Always be sure to include this manual
when selling, lending, or otherwise
transferring the ownership of this product.
4. Never allow children or anyone unable
to fully understand the directives given
in the manual to use the machine.
WORKING CONDITION
1. When using the product, you should
wear proper clothing and protective
equipment:
GB 04
(1) Helmet.
(2) Ear protectors.
(3) Protection goggles or face protector.
(4) Thick work gloves.
(5) Non-slip-solesafety shoes.
2. And you should carry with you:
(1) Provided toolkit.
(2) Enough reserve fuel.
(3) Spare trimmer cord.
(4) Things to demarcate your working
area (warning rope, warning signs).
3. Do not wear loose clothing, jewelry,
short trousers, sandals, or go barefoot.
Do not wear anything which might be
caught by a moving part of the unit.
Secure hair so it is above shoulder
length.