Charging The Radio And The Battery Using A Clr 12-Pocket Multi-Unit Charger (Optional Accessory) - Motorola solutions CLR Serie Benutzerhandbuch

Procedure:
1 Place the SUC on a flat surface.
2 Insert the connector of the power supply into the port on the side of the SUC.
3 Plug the AC adapter into a power outlet.
4 Insert the radio into the SUC with the front of the radio facing the LED of the SUC. Ensure the
radio is securely inserted all the way into the charger.
NOTICE: For more information, see
Guidelines on page
The red LED on the SUC illuminates to indiciate that the battery is charging.
3.7
Charging the Radio and the Battery Using a CLR 12-Pocket
Multi-Unit Charger (Optional Accessory)
The CLR 12-Pocket Multi-Unit Charger (MUC) allows drop-in charging of up to 12 radios or up to six
radios and six stand-alone batteries. The batteries can be charged with the radios or removed and
placed in the MUC separately. Each of the six charging pockets can hold a radio (with or without the
Holster) or battery, but not both at the same time.
Procedure:
1 Place the MUC on a flat surface.
2 Insert the power cord plug into the MUC dual pin connector at the bottom of the MUC.
3 Plug the power cord into an AC outlet.
4 Turn off the radio.
5 Insert the radio or the battery into the charging pocket with the radio or the battery facing away
from the contacts.
Charger LED Indication
7.
MN007428A01-AA
Chapter 3: Battery and Charger
and Operational Safety
25