Browsing Or Selecting Channel; Default Channel Settings For Cps; Led Indicators - Motorola solutions CLR Serie Benutzerhandbuch

2.9

Browsing or Selecting Channel

Procedure:
1 To select a channel, press the Channel/Menu button until the voice announcement "<Color>
Channel <Number>".
2 To select the desired channel, press the + button or - button.
Your hear selected channel voice prompt from your radio.
3 To exit <Channel Change>, press the PTT button or wait for the radio Channel/Menu timer to
expire.
2.10

Default Channel Settings for CPS

The table describes the default channel settings for Customer Programming Software (CPS).
Table 4: Channel Settings for CPS for CLR
CLR446 Models and CLR PLUS Models
Channel
1
2
3
4
5
6
7
8
2.11

LED Indicators

Feature
Monitor mode
Cloning mode
Call tone
Scan
Turn on
Turn off
Advanced radio configuration
Color
Red
Green
Yellow
Blue
Purple
White
Aqua
Orange
LED Indicator
Solid as per channel color.
Double blinking yellow.
Momentary solid as per channel color.
LED slowly displays all current channel colors one after an-
other.
LED displays different colors before finishing on current
channel color.
LED displays solid white LED.
Blinking green.
MN007428A01-AA
Chapter 2: Getting Started
19