Back Panel - Asus WL-320gE Schnellstartanleitung

2) Back panel

The rear panel contains the Ethernet, the DC port, and the Reset button.
LABEL
ETHERNET
RESET
DC
3) Wall mount option
The ASUS WL-320gE Access Point is designed to sit on a a raised flat surface like a file
cabinet or book shelf. The unit may also be converted for mounting to a wall or ceiling.
Follow these steps to mount the ASUS Wireless
Access Point to a wall:
1. Look on the underside for the two mounting
hooks.
2. Mark upper holes in a flat surface.
3. Tighten two screws until only 1/4'' is showing.
4. Latch the hooks of the ASUS Access Point
onto the screws.
Note: Re-adjust the screws if you cannot latch the ASUS Wireless Access Point onto
the screws or if it is too loose.
WL-320gE Access Point Quick Start Guide
Description
The Ethernet port connects to an Ethernet device, such
as to a switch or a router.
Press the Reset button to restore to factory default
settings.
The DC port connects the Access Point power adapter.