REVIER MANAGER RM4 / LF-E Benutzerhandbuch Seite 25

CAMERA MENU
CAM
• Photo Size: The resolution of the pictures on the SD cards can be set.
• Flash Power: The brightness of the flash can be set. Helpful for close
and reflective obstacles
• Photo Burst: On every photo triggered by movement or via app 1-10
photos per second (changeable) are shot. It´s always the first photo
which is transmitted.
• Shutter Speed: When shutter time is set to fast, pictures of moving
objects are sharper but battery depletion is higher
PIR
• PIR Sensitivity: The sensistivity of the movement sensor* can be set.
This is helpful for precise adjusting to large or small objects
* The movement sensor only reacts to changes in the infrared range.
SYS
• Set Clock: Format of date (D = Day, M = Month, Y = Year), date and
time can be set here.
• Language: Language of camera menu can be changed here.
• Password: The camera menu can be secured with a 4 character
password so the camera can be protected from unauthorized access
• Rename: Here the camera can be assigned a name which will then
always be displayed in the picture.
• Diagnosis: The camera will be scanned for errors which can be used
for troubleshooting when the camera isn´t transferring pictures.
• Format SD card: With this function all pictures from the memory card
will be deleted. Pictures in the Reviermanager app gallery are not af-
fected by this.
• Default: The Reviermanager camera will be set back to default set-
tings.
• Software Version: The currently installed firmware version will be
shown. By confirming with a push of the OK button the settings will
be saved. With the MENU button this sub menu will be closed without
saving
25
RM4_Bedienungsanleitung 06-2021_FSCneu.indd 25 RM4_Bedienungsanleitung 06-2021_FSCneu.indd 25
So pictures are only taken when heat signatures in sensor range
change. With this the Reviermanager camera notices movement at
night and day.
24.06.2021 13:24:01 24.06.2021 13:24:01