Mounting Or Removing The Headrest - Vermeiren Eden Gebrauchsanweisung

EN
NL
Minimum inclination: -3°
3.4.1 Manual seat angle / shell inclination adjustment (Eden)
The tilt lever (1) holds the gas spring of the tilt mechanism in position. As soon as the tilt
lever is pulled, the gas spring is released.
To change the seat inclination:
1. Hold the push handle (2) tight and pull the tilt lever (1) with
your finger in a squeezing motion.
2. Push down on the push handle to tilt the seat.
3. Release the tilt lever to block the position.
To return to sitting position:
1. Hold the push handle tight and pull the tilt lever (1) with your
finger in a squeezing motion.
2. Slowly move the push handle up. Release the tilt lever to block the position.
3.4.2 Electrical seat angle / shell inclination adjustment (Eden-E)
To change the inclination of the seat:
1. Press and hold the button on the handset.
 The left button [A] to incline the seat backwards.
 The right button [B] to incline the seat forwards.
2. Letting go of the button at any time will stop the seat in any position.
3. With the movement of the seat, the leg rest is raised accordingly.
3.5

Mounting or removing the headrest

1. Make sure that the large edge of the headrest attachment is placed to the bottom.
2. Using the elastic band, mount the headrest to the desired position on the shell chair top.
3. Using the elastic band, remove the headrest from the shell chair.
Maximum inclination: +30°
2
8
Eden, Eden-E
2020-01
Using the chair
1
B
A