Minute Minder - AEG CRYSTALLINE IKE42640KB Benutzerinformation

5.8 Pause
When the function is active,
symbols can be used.
The function does not stop the timer
functions.
Press to activate the function.
The symbol turns red. The heat setting is
lowered to 1.
To deactivate the function: press
symbol turns white. The previous heat setting
comes on.
5.9 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a single
cooking session.
First set the heat setting, then set the
function.
1. Touch to activate the function or
change the time.
The timer digits
and come on the display.
and turns white.
If the timer is not set, all indicators disappear
after 4 seconds.
2. Touch or
minutes).
After 3 seconds, the timer starts to count
down automatically. The indicators
and disappear.
When the time comes to an end, a signal
sounds and flashes. To stop the signal,
touch .
To deactivate the function: touch
indicators and
to set on the display. Alternatively, set
the heat level to 0. As a result, a signal
sounds and the timer is cancelled.
and
. The
and the indicators
turns red,
to set the time (00 - 99
,
stays red.
. The
come on. Use or
CountUp Timer (The count up
timer)
You can use this function to monitor how
long a cooking zone operates.
Touch twice to activate the function.
The indicator
count up automatically.
To deactivate the function: touch
the indicators light up, touch

Minute Minder

You can use this function when the hob is
activated but no cooking zone operates.
To see the control panel, place a pot on a
cooking zone.
1. Touch
to activate the function.
2. Touch
The function starts automatically after 4
seconds. The indicators
disappear.
When you set the function, you can remove
the pot.
When the time comes to an end, a signal
sounds and
the signal.
To deactivate the function: touch
indicators
to set on the display.
,
The function has no effect on the
operation of any cooking zone.
5.10 Lock
You can lock the control panel while the hob
operates. It prevents an accidental change of
the heat setting.
You need to activate the function
for each appliance separately.
Set the heat setting first.
Touch to activate the function.
turns red, the timer starts to
.
, until the indicator
or to set the time.
, , and
stays red.
flashes. Touch
and light up. Use
ENGLISH
. When
turns red,
to stop
. The
or
87