General Use - Fritel FAMILY SB 2970 Bedienungsanleitung

▪
All parts should be dry!
▪
Ensure that the voltage marked on the appliance is the same as your main voltage. According to the safety
law: only use earthed sockets.

3. GENERAL USE

▪ The Soup Maker has a mixing bar to mix the ingredients and a heating element to heat the ingredients and to
cook soup.
▪ Assemble the appliance: place the lid with the mixing bar on the stainless steel jug.
▪ Before connecting the appliance to the socket, add all ingredients and the water.
Then follow the next steps.
▪ Insert the contact pin into the jug (see drawing) and afterwards the plug in the socket.
You'll hear a sound signal.
▪ Activate the appliance by pressing the on/off button
You'll hear a sound signal and the appliance switches automatically to standby mode.
▪ Press the mode button
▪ Press the start button
finished.
▪ The Soup Maker has a "Time Memory" function, which means that you can add extra ingredients while a
program is running:
1. Remove de lid carefully
2. Add the ingredients (within 3 minutes)
3. Replace the lid
If this takes less than 3 minutes the program will continue. If it takes longer than 3 minutes, you will have to set
the program again. Attention: when using the Smooth, Chunky or Compote mode, hot steam will be released
when removing the lid. This is normal.
▪ The Soup Maker has an "Anti-overflow function". When the substance reaches the overfill sensor, the appliance
deactivates the function immediately. As soon as the substance is reduced, the Soup Maker restarts the recently
chosen function.
▪ Once the program is finished, the appliance deactivates automatically. You'll hear a sound signal every second.
▪ Press the on/off button
▪ Remove the lid carefully and pour the fresh soup/compote in a bowl.
ATTENTION: Never let the motor block come into contact with liquids. If this happens, immediately remove the
plug and have the appliance checked by a recognized repairman.
ATTENTION: At first use some smell might be noticed. This is normal and will disappear by itself.
ATTENTION: NEVER let the appliance overheat. Let the appliance cool down after every program.
to choose a function.
to start the selected function. The chosen function will flash until the program is
to shut down the appliance and remove the plug from the socket.