Linea 2000 Domo DO945SBS Gebrauchsanleitung Seite 46

· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly on the
evaporator, and your refrigerator.
· Before connecting your refrigerator to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
· After installation, leave the freezer for 24 hours before turning it on. This way the refrigerant can
settle.
· Allow the appliance to run empty for 12 hours so the compartment can cool to the appropriate
temperature.
· One can level the appliance using adjustable legs. The adjustable legs can be adjusting by screwing
them in or out of the appliance.
· Rubber bumpers are built into the doors to dampen them. Check that the rubber bumpers are in place
before use. If the rubber bumpers are missing, insert the spare rubber bumpers from the accessory
bag.
! Attention: The rubber bumpers are small parts. Keep out of reach of children to prevent swallowing/
choking.
· The climate class indicates the minimum and maximum ambient temperature for the proper operation
of an appliance. You can find the climate class on the type plate on the back of the appliance.
· SN: Subnormal: ambient temperature between 10°C and 32°C
· N: Normal: ambient temperature between 16°C and 32°C
· ST: Subtropical: ambient temperature between 16°C and 38°C
· T: Tropical: ambient temperature between 16°C and 43°C
ADJUSTING THE DOORS
It is possible that the doors are not aligned due to transport or weight after loading the door racks. You
can adjust it with the supplied C-rings.
1. Make sure the appliance is level. If necessary, align the front levelling feet.
2. Check that the top of the doors are aligned. If not, lift the lowest door a little and place one or more
C-rings between the bottom of the door and the hinge.
46
DO945SBS
Lift Lower
16