Using Airplay 2® Technology - Canton Smart Soundbox 3 Kurzanleitung

English
USING AirPlay 2® TECHNOLOGY
With Apple® AirPlay® technology, you can play audio content over the wire-
less network (WLAN) using your Smart Soundbox 3.
Additionally, AirPlay 2® technology offers you the possibility to play your con-
tent on several loudspeakers and/or amplifiers synchronously.
Connecting the Smart Soundbox 3 to the WLAN (WiFi network) via iPhone®,
iPad® or iPod touch®:
To connect your Smart Soundbox 3 to your wireless network (WLAN) via
iPhone, iPad or iPod touch, please proceed as follows:
Connect your Soundbox 3 to the power outlet and wait until the display
1
shows [WIF] / [SET].
On your iPhone, iPad or iPod touch, select „Settings" and then „Wi-Fi"
2
(WLAN).
Under the menu item „SET UP NEW AIRPLAY SPEAKER" select the Smart
3
Soundbox 3 as the device to be installed.
The „AirPlay Config..." window opens.
4
a. Under „Network" select the network to which you want to con-
nect the Smart Soundbox 3.
b. Under "Speaker name" enter the name (synonym) you want to
assign to the Soundbox 3.
c. Optionally, you can assign a password under „SPEAKER
PASSWORD".
d. Select the function „Next" and wait (approx. 30 seconds) until the
Soundbox 3 shows [WIF] / [CON] in the display.
Finalize the registration process in the „Configuration finished" window
5
that opens by pressing the „Done" button. The Smart Soundbox 3 is now
connected to your WLAN (Wi-Fi network) and ready for use.
28